Hello Guest it is April 17, 2024, 11:25:57 AM

Author Topic: uc400eth plugin won't enable  (Read 561 times)

0 Members and 1 Guest are viewing this topic.

uc400eth plugin won't enable
« on: June 18, 2022, 12:51:05 PM »
 Hello everyone,

   I am running  licensed mach3 4.043.062 on a win7 machine and I have a uc400eth motion controller.
 problem Im having is the plugin will not enable. If I enable it and restart mach3 it goes back to disabled.
Any ideas on this issue? Thanks.

Charlie M.