Hello Guest it is February 27, 2024, 06:45:45 PM

Author Topic: LED, IO and buttons mapping for Pokeys57E and Mach3  (Read 1534 times)

0 Members and 1 Guest are viewing this topic.

LED, IO and buttons mapping for Pokeys57E and Mach3
« on: February 09, 2022, 10:42:55 AM »
Hello all,

I am using Pokeys57E only to manage my CNC control pannel (for the motion board I am using an Axbb-e)

No problem to use them together (for the moment) but something boring is that we haven't a complet list of the LED, IO and buttons linked to Mach3, at each time I want do a modification I should scroll down the list to find the good item.

Is there somewhere this list of mapping?

Regards,
Seb
Re: LED, IO and buttons mapping for Pokeys57E and Mach3
« Reply #1 on: March 11, 2022, 02:59:26 PM »
Nobody can help me?
Re: LED, IO and buttons mapping for Pokeys57E and Mach3
« Reply #2 on: March 11, 2022, 05:00:17 PM »
I have done it for buttons and LEDs and IOs, here are the lists
« Last Edit: March 11, 2022, 05:14:39 PM by schum22 »
Re: LED, IO and buttons mapping for Pokeys57E and Mach3 (OEM)
« Reply #3 on: March 28, 2022, 04:21:32 PM »
Sorry I didn't know the good name they are OEM Buttns and LEDS.....

https://www.machsupport.com/wp-content/uploads/2013/02/Mach3_V3.x_Macro_Prog_Ref.pdf