Hello Guest it is May 30, 2024, 05:28:22 PM

Author Topic: ArcPRO Problems  (Read 2021 times)

0 Members and 1 Guest are viewing this topic.

ArcPRO Problems
« on: January 17, 2022, 04:53:58 PM »
I have a ARCPRO package with HiCON Integra 7866 and 77ISO Tip Voltage Adapter board. I'm using Sheetcam with Mach 4 Plasma post processor. After my torch turns on and pierces it doesn't want to move. I verified my ohmic probe and ArcOK Signal is working correctly. I've attached a picture of the gcode and status.