Hello Guest it is October 04, 2023, 11:29:07 PM

Author Topic: ArcPro 7866 Plasma Combo  (Read 584 times)

0 Members and 1 Guest are viewing this topic.

ArcPro 7866 Plasma Combo
« on: December 31, 2021, 01:38:05 PM »
I am new to mach4 and just upgraded my plasma table to use the 7866 module.  I had the myplasm originally.  I am using sheetcam to do the post processing and was wondering what post processor works best for mach4 with the arcpro 7866
Re: ArcPro 7866 Plasma Combo
« Reply #1 on: January 20, 2022, 08:28:56 PM »
Not sure about the arcpro table. What type of THC do you have?
Re: ArcPro 7866 Plasma Combo
« Reply #2 on: January 21, 2022, 01:37:16 PM »
it is built into the 7866 module
Re: ArcPro 7866 Plasma Combo
« Reply #3 on: January 21, 2022, 04:08:58 PM »
There should be a sheetCAM Mach4 post with no Z moves which I think you can use. I think the ArcPro screen has DROs for setting cut heights etc. on the screen which are read in the M3/M5 macros. If not best to ask Vital Systems