Hello Guest it is April 12, 2024, 06:26:57 AM

Author Topic: Pokeys 57e and Mach4 mill spindle encoder SRO question  (Read 3076 times)

0 Members and 1 Guest are viewing this topic.

Re: Pokeys 57e and Mach4 mill spindle encoder SRO question
« Reply #10 on: July 19, 2021, 05:22:59 PM »
Can you rigid  tap ?

Offline Azalin

*
  •  181 181
    • View Profile
Re: Pokeys 57e and Mach4 mill spindle encoder SRO question
« Reply #11 on: July 19, 2021, 05:24:43 PM »
Machine is still unfinished so I don't know yet :)
Re: Pokeys 57e and Mach4 mill spindle encoder SRO question
« Reply #12 on: July 16, 2022, 04:33:49 PM »
Hi,

My problem solved as follows:

As I described everything was good. In diagnostics screen all inputs and outputs worked fine. The reason Mach4 didn't display the actual RPM was just a screen set misconfiguration. I clicked the "Edit Screen" menu item then selected the "Spindle RPM" text field. Then in the "DRO Code" property I just selected "Spindle True RPM" then save.

After that Mach4 started to display the true RPM that comes from the encoder.

Solved this by an accident took my 2 weeks. Dang!

Your 2 week accident saved me a ton of time.  I had already spent most of a day pulling my hair out over this.  Thanks for posting your solution.  Worked like a champ!

Offline Azalin

*
  •  181 181
    • View Profile
Re: Pokeys 57e and Mach4 mill spindle encoder SRO question
« Reply #13 on: July 16, 2022, 04:36:06 PM »
Hi,

My problem solved as follows:

As I described everything was good. In diagnostics screen all inputs and outputs worked fine. The reason Mach4 didn't display the actual RPM was just a screen set misconfiguration. I clicked the "Edit Screen" menu item then selected the "Spindle RPM" text field. Then in the "DRO Code" property I just selected "Spindle True RPM" then save.

After that Mach4 started to display the true RPM that comes from the encoder.

Solved this by an accident took my 2 weeks. Dang!

Your 2 week accident saved me a ton of time.  I had already spent most of a day pulling my hair out over this.  Thanks for posting your solution.  Worked like a champ!

I'm happy to help.
Re: Pokeys 57e and Mach4 mill spindle encoder SRO question
« Reply #14 on: July 21, 2022, 12:27:16 PM »
Good job.
« Last Edit: July 21, 2022, 12:28:53 PM by gabedrummin »