Hi!
i get some daily trouble with my retrofit.
all works but the turret have RED DAYS
Problem:
i done my retrofit first without the turret.
for Spindle index, homing x and z i use hallic called 44e.
all works correct.
the i convert the turret to a nema17 stepper and a hallic 44e for reference/homing point.
the homeing position is on a point where the pawl is in contact and secured. its tool1.
i done all on the desk with parallelport.
it works everytime correct.
then i connect all to the ess.
and now? the homing dont work.
nothing is changed on mechanic,electric,wiring.
the homing travel less.
and get not in contact.
if i changed to parallelport... it works.
back to ess.. pawl not in contact.
i only loose my parallelport cable and put it in the socket from the pc or ess.
it takes second.
i only open mach3 with parallelport or ess. all settings are the same.
any idea? for me it sounds that i must config something on the ess.
thanks for help..