Hello Guest it is March 29, 2024, 11:09:59 AM

Author Topic: Bulkman Trouble  (Read 1737 times)

0 Members and 1 Guest are viewing this topic.

Bulkman Trouble
« on: September 06, 2021, 06:57:18 PM »
Hello
purchased a Bulkman Queenbee Pro
Having trouble getting it to run with Mach 3
it jogs smooth on all axis but will not hold position it is jerky when running  G Code
when trying to set the steps it adds steps alot  from 5 mm to 80mm when adjust the numbers given it makes it worse Iam new at this but here are the settings I have so far any advice would be great


UC300 Digital Dream controller, TB6600 micro stepper drivers, Mach3 version R3.043 Windows 10.

Offline Tweakie.CNC

*
  • *
  •  9,196 9,196
  • Super Kitty
    • View Profile
Re: Bulkman Trouble
« Reply #1 on: September 07, 2021, 12:44:03 AM »
Hi Bosco,

Unfortunately this forum does not support Novusun / Digital Dream products due to their continued Mach3 license violation. This thread refers; https://www.machsupport.com/forum/index.php?topic=24331.0

You need to contact the supplier of your Digital Dream UC300 equipment and seek their advice on the appropriate Mach3 settings.

In general, the Chinese motion controllers (which have no manufacturers support) seldom work well and you may find that changing to an EU or USA manufactured motion controller (which do have manufacturers support) is the best way forward.

Tweakie.
PEACE