Hello Guest it is June 19, 2019, 01:44:55 AM

Author Topic: How To do Multiple Parts  (Read 2128 times)

0 Members and 1 Guest are viewing this topic.

How To do Multiple Parts
« on: October 16, 2007, 05:39:32 PM »
I am new to using mach 3 and I need to create some parts, but I want to create 4 at a time. Is there a way in mach to do this. Each is 3 inches are apart on the X axis.

I would assume it would be something like this
Cut part#1 @ 0,0
move to 3,0
reset DRO to 0,0
cut part #2
and so on

But how to do that?

Offline Hood

*
  •  25,844 25,844
  • Carnoustie, Scotland
    • View Profile
Re: How To do Multiple Parts
« Reply #1 on: October 16, 2007, 07:11:55 PM »
Use G52 or try the nesting wizard. You will find info in the Mach manual on how to use G52

Hood