Hello Guest it is September 30, 2023, 08:43:24 AM

Author Topic: Mach3 and a chinese usb controller  (Read 609 times)

0 Members and 1 Guest are viewing this topic.

Mach3 and a chinese usb controller
« on: July 17, 2021, 11:32:35 PM »
About 3 years ago I bought a 6040cnc with a T-D 3 axis controller with a 4th axis setup. The software that came with it was a trial version. So up on a shelf everything went when the trial version expired and some health issues come about. A few days ago I got it back down and I really want to do something with it. Now my controller has usb and I was wondering if the Mach3 will work on it?

Offline Graham Waterworth

  • *
  •  2,622 2,622
  • Yorkshire Dales, England
    • View Profile
Re: Mach3 and a chinese usb controller
« Reply #1 on: July 18, 2021, 08:49:22 PM »
It all depends if there is a USB driver/plugin for the board in the controller, it might be a good idea to take the lid off and post some pictures so we can see if we have seen it before.
Without engineers the world stops