Machsupport Forum
Mach Discussion => General Mach Discussion => Topic started by: mjadams61 on July 17, 2021, 11:32:35 PM
-
About 3 years ago I bought a 6040cnc with a T-D 3 axis controller with a 4th axis setup. The software that came with it was a trial version. So up on a shelf everything went when the trial version expired and some health issues come about. A few days ago I got it back down and I really want to do something with it. Now my controller has usb and I was wondering if the Mach3 will work on it?
-
It all depends if there is a USB driver/plugin for the board in the controller, it might be a good idea to take the lid off and post some pictures so we can see if we have seen it before.