Hi,
I've set up my home position for X,Y,Z.....set up my soft limits just shy of the limit switches, entered all the values into Motor Home/Soft Limits, (X - Soft Max 700, Y - Soft Max 740, Z - Soft Max 0) (X - Soft Min 0, Y - Soft Min 0, Z - Soft Min -8). X & Y are set to Home Negative. When I select Machine Coord's and press Ref All Home, the Z-axis starts going into the negative direction and never stops, (I turned off the stepper for the Z-axis), and subsequently the X and Y axes never ref home either. Not sure what setting might be affecting this, just set the machine up after a rewiring job. everything works ok with the keyboard and remote controller, I just can't seem to set the Machine Coord's to the home position... Any thoughts?