I am trying to set up My new DSPMCv3 board with MACH4 and am completely lost on how to identify what pins are what in MACH4. The HICON that is installed only shows inputs/outputs P11-15. My board has 9 different connectors on it. I went back and double checked on Vital Website to see if I accidentally installed the wrong plugins. Folder name is DSPMC but the actual plugin name in the folder is labeled HICON. Do I have the wrong plugins installed maybe?
 I am just getting back into the CNC world after being out for over 10 Years so I have some catching up to do on all the latest and greatest whistles and bells.
Thanks
BK

The user guide is available on our website:

https://www.vitalsystem.com/portal/motion/dspmc/DSPMCv3-UserGuide.pdf

look at page 19.  The tables starting from J1 shows the mapping in mach4.

Let me know if you are looking for something else.

 Thanks very much for the super quick reply. I was looking at this manual for 2 hours but missed that. Just intimidated with some many new things I guess.
BK