Hello Guest it is April 14, 2021, 01:59:50 PM

Author Topic: Mach3turn rapid override problem  (Read 67 times)

0 Members and 1 Guest are viewing this topic.

Mach3turn rapid override problem
« on: February 17, 2021, 10:57:52 AM »
Hi all,

I have a problem with rapid override that's been bugging me for the last 2 weeks. I have feed override, spindle override both working perfect, but the rapid override I can't seem to get working, my lathe has a ESS controller and Mach3 v3.043.062, I have made slider for it (1-100%) and made buttons with setOEMdro 223 value 10, 50... but no change in the rapidspeed, If I move the slider the dro changes so why is it not working.

I can get this to work - made a toggle button to 227, and set dro 104 to 200, and it's sloowing the rapid down!

I have read and watched videos of other people making this, so what am I missing, any ideas, or is it mach3 that needs a reinstall?

Regards Morten
Re: Mach3turn rapid override problem
« Reply #1 on: February 18, 2021, 12:54:03 PM »
Got it figured out, in "general config" unselected "no FRO on queue", now it works:-)

/Morten