Hello Guest it is November 27, 2021, 04:36:37 PM

Author Topic: Mach3 problems with Windows 10 updates  (Read 223 times)

0 Members and 1 Guest are viewing this topic.

Mach3 problems with Windows 10 updates
« on: February 03, 2021, 06:49:33 PM »
My Mach3 has been working fine and suddenly won't load G code from Vetric. It works fine on manual and pendant. I read someplace where Mach# won't work beyond Ver. 1709. Wonder if this is the problem as I haven't used machine for about 4 months and windows has now updated to 1909.

Offline TPS

  •  2,210 2,210
    • View Profile
anything is possible, just try to do it.
if you find some mistakes, in my bad bavarian english,they are yours.