Hello Guest it is April 14, 2021, 02:23:28 PM

Author Topic: usb joystick run away  (Read 2035 times)

0 Members and 1 Guest are viewing this topic.

usb joystick run away
« on: October 09, 2007, 10:29:23 PM »
While setting up a part to cut I bumped the joystick and it fell off the table and unplugged itself from the comp.  My mill developed a mind of its own, all axis starting running and I had to hit the emergency power down.  I use the keygrabber for input, and the latest version of Mach 3.  Not a huge issue, but for someone with a fast mill it could be.