Hello Guest it is December 02, 2021, 10:41:39 PM

Author Topic: Mach3 can only "Auto-tool zero" once per session  (Read 445 times)

0 Members and 1 Guest are viewing this topic.

Re: Mach3 can only "Auto-tool zero" once per session
« Reply #10 on: January 29, 2021, 09:48:01 AM »
Thanks a lot! Can you try and explain to me what could have been the issue here? I'll try it and will let you know if it works or not! Thank you.

Offline TPS

*
  •  2,210 2,210
    • View Profile
Re: Mach3 can only "Auto-tool zero" once per session
« Reply #11 on: January 29, 2021, 11:44:15 AM »
basicly i removed the G91 from the G31 code line, had some Problems by using G90/91 in same line
with G31 in the past.
anything is possible, just try to do it.
if you find some mistakes, in my bad bavarian english,they are yours.