Hello Guest it is March 28, 2024, 06:45:55 AM

Author Topic: convert step/dir 2 Mechatrolink  (Read 525 times)

0 Members and 1 Guest are viewing this topic.

convert step/dir 2 Mechatrolink
« on: January 18, 2021, 01:25:46 PM »
we have new project to upgrade old cnc that use Yaskawa mechatrolink
we use pokeys cards that they custom for us and we real get use them and don't want replace
is there any to stay with our pokeys ,just find device that take the signal from our 3 or 4 motor outputs step/dir
and package it and send it by mecharolink format to this 3 or 4 yaskawa drivers ? instead of find other hardware or replace the servo
thanks
Re: convert step/dir 2 Mechatrolink
« Reply #1 on: January 18, 2021, 04:37:57 PM »
Keep the motors and change out the drives. I bet you can find drives on Ebay that will run the motors.
Fixing problems one post at a time ;)

www.newfangledsolutions.com
www.machsupport.com