Hello Guest it is July 31, 2021, 09:14:55 AM

Author Topic: Help with time delay output  (Read 300 times)

0 Members and 1 Guest are viewing this topic.

Help with time delay output
« on: January 10, 2021, 10:52:00 PM »
I am retrofitting a machine for a friend with pmdx-126  driving the original parker xl25 drivers. The machine has a z brake which I have relay controlled via output 4. My problem is when I enable the machine the z brake releases instantly and the stepper drivers take maybe .5 sec to power up and lock the motor. The z axis drops slightly due to this delay. I am trying to create a brain that will delay the output 4 brake  release for 1 sec. I tried --- output enable 1 ---- timer  ----- output 4. I seem to be a little confused by the timer config. I initially tried A - delay trigger to .5 and B pulse time to 1 sec. The relay just pulses on and off.  Any help would be greatly appreciated

Offline TPS

*
  •  2,191 2,191
    • View Profile
Re: Help with time delay output
« Reply #1 on: January 11, 2021, 01:25:05 AM »
attached a small sample, witch should do it
anything is possible, just try to do it.
if you find some mistakes, in my bad bavarian english,they are yours.
Re: Help with time delay output
« Reply #2 on: January 12, 2021, 12:39:55 AM »
Thank you TPS - I will try it out in the morning
Re: Help with time delay output
« Reply #3 on: March 03, 2021, 07:19:19 AM »