Hello Guest it is September 22, 2021, 09:58:41 AM

Author Topic: Mach3 - SolidWorks Cam - Absolute/Incremental (IJ)  (Read 213 times)

0 Members and 1 Guest are viewing this topic.

Mach3 - SolidWorks Cam - Absolute/Incremental (IJ)
« on: November 29, 2020, 02:55:22 AM »
ok So I have a part a simple 2.5d part that I want to cut, but I can not get the program to run properly I am running .62 of Mach3.
Solidworks Cam 2020 I have tried several post processors and they all give similar problems.
So I attach it here I would appreciate someone telling me what if anything to amend in my post processor, or my post settings for this file. At this point I am at a loss.

Thanks for Taking a look!
Re: Mach3 - SolidWorks Cam - Absolute/Incremental (IJ)
« Reply #1 on: November 29, 2020, 01:27:51 PM »
The Error continues to occur on line N206 the error;
---Radius to end of arc differs from radius to start , Block = N206 G03 Y19.42 I-12.717 J9.71
Line 208