Hello Guest it is April 23, 2024, 10:20:05 AM

Author Topic: reinstalling Mach3 and cannot reverse Y axis direction  (Read 729 times)

0 Members and 1 Guest are viewing this topic.

reinstalling Mach3 and cannot reverse Y axis direction
« on: October 28, 2020, 08:21:52 PM »
I just had to reinstall Mach3 on a system that was working before and now I cannot change the direction of Travel on the Y axis. Change the setting in the MotorHome/Softlimits  screen save setting rebotted system and still goes in the reverse direction. any help would be appreciated

Offline TPS

*
  •  2,505 2,505
    • View Profile
Re: reinstalling Mach3 and cannot reverse Y axis direction
« Reply #1 on: October 29, 2020, 03:14:00 AM »
try Config -> Ports&Pins -> Motor Outputs -> Dir LowActive
anything is possible, just try to do it.
if you find some mistakes, in my bad bavarian english,they are yours.
Re: reinstalling Mach3 and cannot reverse Y axis direction
« Reply #2 on: October 29, 2020, 07:02:19 AM »
OMG how could I have missed this thanks so much