Hello Chaps.
I have been trying for the last 6-10 years to get my Mach3 lathe running .
I started with just the basic 2 axis system but as time went on I got a vsd and a 3rd axis
installed as well as some rudimentary accessories like home switches, limit switches and other
bits and pieces added.
I am no electrician nor a electronics fundi so I have had these installed by various other proffesional
and wannabee proffesional "experts" but usually in the installation something else was upset
and had to be redone.
The latest thing is that I am told that the lpt port has given up the ghost and that lpt ports are
virtually unobtainable so I should convert to a network system.
I have had a guts full of all this messing around .
can someone please point me to a place where I can buy the complete setup in one smack.
I would like to buy a "box" which will enable me to connect my computer at the one end and all the
steppers, limit switches , cables and the rest to the other end then switch the damn thing on
and calibrate the machine and then get on with some meaningful chip making.
Please suggest a supplier who can do this for me?
all help is sincerely appreciated !!