Hello Guest it is April 17, 2021, 09:58:35 AM

Author Topic: Pins and Ports for Fireball V90  (Read 757 times)

0 Members and 1 Guest are viewing this topic.

Pins and Ports for Fireball V90
« on: September 13, 2020, 05:38:03 PM »
I just bought a Fireball V90 cnc wood router. I cant make it run with my Mach3 controller. What Full configuration Pins , Port, Motor etc do I need to make this communicate with my machine.

Offline Tweakie.CNC

*
  • *
  •  8,696 8,696
  • Super Kitty
    • View Profile
    • Tweakie.CNC
Re: Pins and Ports for Fireball V90
« Reply #1 on: September 14, 2020, 01:43:47 AM »
Does your machine have LPT Parallel Port or Ethernet ?

Tweakie.
KEEP SAFE !
Re: Pins and Ports for Fireball V90
« Reply #2 on: September 14, 2020, 10:26:05 AM »
I am running it from USB port to its control box
Re: Pins and Ports for Fireball V90
« Reply #3 on: September 14, 2020, 10:28:36 AM »
It is a port like on a printer lol don’t know computer tech terms

Offline TPS

*
  •  2,110 2,110
    • View Profile
Re: Pins and Ports for Fireball V90
« Reply #4 on: September 14, 2020, 02:04:28 PM »
Pictures, Pictures, Pictures.
anything is possible, just try to do it.
if you find some mistakes, in my bad bavarian english,they are yours.
Re: Pins and Ports for Fireball V90
« Reply #5 on: September 14, 2020, 02:45:05 PM »
How do I post pics? Don’t c any icon to send pics???
Re: Pins and Ports for Fireball V90
« Reply #6 on: September 14, 2020, 02:55:31 PM »
This is from computer to control box.
Re: Pins and Ports for Fireball V90
« Reply #7 on: September 14, 2020, 03:00:11 PM »
And this is back of control box to xyz axis motors. Is this what u needed???
Re: Pins and Ports for Fireball V90
« Reply #8 on: September 14, 2020, 05:03:29 PM »
try try again
Re: Pins and Ports for Fireball V90
« Reply #9 on: September 14, 2020, 05:08:14 PM »
those are the two pics from computer to control box and control box to step motors. I use a usb to printer style connection and then each axis has its own cord goin to motors. I just dont know correct Pins and Ports and Motor values to put in Mach3 to configure this machine correctly so i can start running programs.