Hello Guest it is October 24, 2021, 12:28:45 AM

Author Topic: Mach3  (Read 413 times)

0 Members and 1 Guest are viewing this topic.

« on: November 11, 2019, 09:44:50 AM »
Hi all, I have a problem with loading Mach3, If my CNC computer plays up I can normally use the saved copy of Mach3 from my USB stick to get working again. This happen at the weekend , although this copy works on my house computer it will not work on the CNC one. When I press the reset button I have no green light on my controller. I have checked the charge pump setting in Mach3 ports and pins.