Hello Guest it is March 28, 2024, 02:35:30 PM

Author Topic: CNC project, Laser, Mill and Lathe  (Read 5061 times)

0 Members and 1 Guest are viewing this topic.

CNC project, Laser, Mill and Lathe
« on: October 22, 2019, 11:09:12 AM »
Used CNC Mill and Mach3 to cut out and drill the Hone body and mill the anvil and stone holder.  Used Mach4 lathe to knurl, drill and tap the hone anvil, stone holder and tension knobs. My little laser isn't running mach but was useful in creating the artwork for the cover and scoring and cutting the box inserts.  CNC...ideate....create.

RT