Hello Guest it is March 28, 2024, 09:35:22 AM

Author Topic: New Computer w/ no parallel port  (Read 7336 times)

0 Members and 1 Guest are viewing this topic.

Re: New Computer w/ no parallel port
« Reply #10 on: September 20, 2007, 06:25:15 PM »
Thanks guys,

Great news...I recieved the PCI Multi I/O card from Rogers and stuck it in the Dell 531 and installed the software(Net Mos) on the CD that came with it
and it is running a my Bridgeport with 1800 oz motors with Mach 3 and communicating perfectly.  I changed the resources hex number in
Mach 3 to what it assigned itself in Windows XP (9C00). The brand they sent was "For BEST Ports Connection" I did not check the voltage, but it is not missing steps which is usually the problem with the 3.3 volt output parallel ports. It must be 5 volts output, but I'll check with seller..

Thanks again guys
Danny

Offline Chaoticone

*
  • *
  •  5,624 5,624
  • Precision Chaos
    • View Profile
Re: New Computer w/ no parallel port
« Reply #11 on: September 20, 2007, 09:01:10 PM »
 :)

Brett
;D If you could see the things I have in my head, you would be laughing too. ;D

My guard dog is not what you need to worry about!