Hello Guest it is June 08, 2023, 04:51:15 PM

Author Topic: Motor pin number changes.  (Read 2975 times)

0 Members and 1 Guest are viewing this topic.

Motor pin number changes.
« on: September 11, 2007, 09:39:01 PM »
I have been running Mach 2 for a couple of years with very good success. I recently upgraded to Mach 3 R2.45. I am running a 1GHz computer with XP Pro. Everything seems to be working OK with the exception of the fact that the motor step pin numbers keep changing. I will correct the pin numbers (the step pin numbers are the ones that keep changing) and try to dry run a program. Most times the X axis (I am running Mach 3 turn to drive a 9 x 20 lathe) will stop moving in the middle of the program. When I check the pin assignments they are changed to something random. I tried running Mach 2 provided with this release and have the same problem. This is a licensed copy. Thanks for any help you can provide.
Re: Motor pin number changes.
« Reply #1 on: September 11, 2007, 09:46:05 PM »
Coould you please send me the XML that is giving you trouble?
Fixing problems one post at a time ;)

Re: Motor pin number changes.
« Reply #2 on: September 11, 2007, 11:30:28 PM »
Hello Brian,

Thank you for the quick reply. I emailed you the xml file. Thanks again...