Hello Guest it is March 28, 2024, 09:42:17 PM

Author Topic: How to get more digital outputs for 4 axis?  (Read 896 times)

0 Members and 1 Guest are viewing this topic.

How to get more digital outputs for 4 axis?
« on: October 02, 2019, 06:40:59 AM »
Hi,

I use Mach3 at my CNC mill with the Benezan break out board (http://www.benezan-electronics.de/manuals/Breakout7-Installation.pdf) and I am very happy with this.
But in future I will use a 4 axis, so it isnĀ“t a problem to conect at this board.
My problem is, my 4 axis has a hydraulic brake and I need a digital output from Mach3 to lose this hydraulik brake to turn the 4 axis.

How can I solve this problem?

Regards Stefan


Re: How to get more digital outputs for 4 axis?
« Reply #1 on: October 02, 2019, 02:12:33 PM »
Hi,
you need a second port. This will require that you fit a second parallel port card to your PC. Not all parallel ort cards work,
I would recommend buying one from PMDX, they have selected and tested a working card. You will also need another
breakout board, you could get another of the one you already have or you could get one from PMDX.

https://www.pmdx.com/2PARPCI

Craig
« Last Edit: October 02, 2019, 02:23:34 PM by joeaverage »
'I enjoy sex at 73.....I live at 71 so its not too far to walk.'