Hello Guest it is March 29, 2024, 04:07:32 AM

Author Topic: Manufacture PCB  (Read 4592 times)

0 Members and 1 Guest are viewing this topic.

Manufacture PCB
« on: April 02, 2006, 06:19:52 PM »
I want to create PCB with the programs Proteus and Galaad. Galaad creates a file ISO. This files ISO is usable with Mach3? Thanks, Giordano
Re: Manufacture PCB
« Reply #1 on: April 02, 2006, 06:49:36 PM »
Is this just for drilling? If so send me a file and I will see if it can be done...
Fixing problems one post at a time ;)

www.newfangledsolutions.com
www.machsupport.com
Re: Manufacture PCB
« Reply #2 on: April 02, 2006, 07:09:13 PM »
Hi. These are two fileses: 1) created with Proteus and Galaad; 2) produced with Eagle 4.13 and Galaad. Thanks, Jordan
Re: Manufacture PCB
« Reply #3 on: April 02, 2006, 08:28:26 PM »
After looking at the code I think I can make a VB converter or I can make it a part of LazyCam :)
Fixing problems one post at a time ;)

www.newfangledsolutions.com
www.machsupport.com
Re: Manufacture PCB
« Reply #4 on: April 05, 2006, 06:33:20 AM »
Hi. Excuse for my English. I am Italian. If sending can be useful the files Gerber 274X and the files Excellon both created with the Cam Processor of Eagle 4.13. Eagle is maybe the CAE more diffused free. It has some limitation for the dimensions of the board, but she works completely. It would be a good idea to include in Mach3 the possibility to import the fileses created with Eagle like with Galaad. Thanks, Giordano.
Re: Manufacture PCB
« Reply #5 on: April 05, 2006, 10:19:01 AM »
Thank you !
Fixing problems one post at a time ;)

www.newfangledsolutions.com
www.machsupport.com