both axis are rotating the material but they need separate homing sensors
At this point we have both axes slaved together, and each are homing to there individual sensors.
Now I would like to make their 0 location at different values away from their individual homing sensors.
Is this possible?
I think it can be done, but how automated it can be i don't know, without playing around.
Not going to spend time playing around.
A modified screen page with proper DRO's, buttons, and VB can be used to manipulate
conditions. Typical setup is to reference the machine then define a Work Offset to the part.
Using the generic sceen you are restricted as that is for conventional / typical setups.
When you reference a machine you define to the controller where the axes are and the play on words is
that homing / referencing is the same and that is not exactly true.
Conventionaly Y axis is linear C axis is rotational. Uncoventualy you can do whatever ....which can create problems
,but, the controller is stupid and only knows what you tell it!
Attach your xml file so your cofiguration can be reviewed.
RICH