Hello
Being new to this game I have downloaded Mach3 turn & on drawing a spindle on autocad & saving in DXF,importing to mach3 & then generating G-code the spindle appears to have no thickness.On the drawing it is approx19mm dia, but on the mach3 screen it seems to be around the centre line, is there a simple offset I can add to the g-code  or am I just talking silly.
thanks Gary.

The lathe import DXF in mach 3 sucks at best... Lcam will be coming out with lathe stuff soon.

Thanks
Brian

Thanks Brian
I,ll just have to con he lathe into thinking it,s someware it,s not.
cheers Gary