Hello Guest it is December 14, 2019, 09:21:57 PM

Author Topic: G100, Mach3: What's features are not working?  (Read 5405 times)

0 Members and 1 Guest are viewing this topic.

Offline Haik

*
  •  71 71
  • MachUser
    • View Profile
G100, Mach3: What's features are not working?
« on: May 10, 2007, 10:26:15 PM »
Can you please list for me the features that are not working when using Mach3 R2.00.065 and the G100 v2.00.064 Plugin?

Also, at the moment I'm interested in probing, does that work?  Thanks in advance!!

Offline ART

*
  • *
  •  1,698 1,698
  • Tough as soggy paper.
    • View Profile
Re: G100, Mach3: What's features are not working?
« Reply #1 on: May 14, 2007, 09:01:53 AM »
Hi:

 Probing is not yet funcyional I think. I say I think because I havent used it, but I do haveit on my board to complete.
Probeing in the printer port is fast, but on the G100 I have a timing problem that could maek it very slow. It shoudl be turned on soon.

Art

Offline Monty

*
  •  116 116
    • View Profile
Re: G100, Mach3: What's features are not working?
« Reply #2 on: May 16, 2007, 09:16:39 PM »
How about soft limits, MPG and spindle sensing?

Just getting ready to switch my mill from AH-HA to Mach3/G100.

How about lathe threading. Mach3/G100 is going on that too, but I need the mill to make some parts for it first.

Monty
Re: G100, Mach3: What's features are not working?
« Reply #3 on: June 10, 2007, 10:31:42 AM »
What about backlash comp? is it workin with G100...
I would otherwise test it but damn wiring change from pport to G100 takes too much time.

Regards Mika

Offline mhdale

*
  •  130 130
  • Knowledge is the Treasure.
    • View Profile
    • Black Dragon Technologies
Re: G100, Mach3: What's features are not working?
« Reply #4 on: August 18, 2007, 11:08:23 PM »
Hey Guys, Has anyone done probing on the GRex ? Is it working? Any Issues?
Mike

Offline Chaoticone

*
  • *
  •  5,634 5,634
  • Precision Chaos
    • View Profile
Re: G100, Mach3: What's features are not working?
« Reply #5 on: August 19, 2007, 08:23:36 PM »
I tried a while back with no luck. It may be fixed now, not sure. Give it a try and see.

Brett
;D If you could see the things I have in my head, you would be laughing too. ;D

My guard dog is not what you need to worry about!