Machsupport Forum

Third party software and hardware support forums. => Mach3 and G-Rex => Topic started by: Haik on May 10, 2007, 10:26:15 PM

Title: G100, Mach3: What's features are not working?
Post by: Haik on May 10, 2007, 10:26:15 PM

Can you please list for me the features that are not working when using Mach3 R2.00.065 and the G100 v2.00.064 Plugin?

Also, at the moment I'm interested in probing, does that work?  Thanks in advance!!

Title: Re: G100, Mach3: What's features are not working?
Post by: ART on May 14, 2007, 09:01:53 AM

Hi:

 Probing is not yet funcyional I think. I say I think because I havent used it, but I do haveit on my board to complete.
Probeing in the printer port is fast, but on the G100 I have a timing problem that could maek it very slow. It shoudl be turned on soon.

Art

Title: Re: G100, Mach3: What's features are not working?
Post by: Monty on May 16, 2007, 09:16:39 PM

How about soft limits, MPG and spindle sensing?

Just getting ready to switch my mill from AH-HA to Mach3/G100.

How about lathe threading. Mach3/G100 is going on that too, but I need the mill to make some parts for it first.

Monty

Title: Re: G100, Mach3: What's features are not working?
Post by: Mstcnc on June 10, 2007, 10:31:42 AM

What about backlash comp? is it workin with G100...
I would otherwise test it but damn wiring change from pport to G100 takes too much time.

Regards Mika

Title: Re: G100, Mach3: What's features are not working?
Post by: mhdale on August 18, 2007, 11:08:23 PM

Hey Guys, Has anyone done probing on the GRex ? Is it working? Any Issues?
Mike

Title: Re: G100, Mach3: What's features are not working?
Post by: Chaoticone on August 19, 2007, 08:23:36 PM

I tried a while back with no luck. It may be fixed now, not sure. Give it a try and see.

Brett