Hello Guest it is September 28, 2021, 01:06:10 AM

Author Topic: mach3 and Bridgeport Boss5  (Read 512 times)

0 Members and 1 Guest are viewing this topic.

mach3 and Bridgeport Boss5
« on: February 14, 2019, 10:51:38 AM »
I have a old CNC Bridgeport Boss 5 with a cnc conversion kit using the original motors running on Mach3. The machine runs great and very tight. The issue I am having is with x and y axis in straight lines it runs smooth but if I make a circle pocket or bore a hole the machine seems to vibrate a lot and leaves a chatter marks not smooth almost as if the motors are not tuned correctly but not sure. I am cutting cast aluminum and part is very secure so it is not a fixture issue. The machine vibrates while cutting air when doing a circle cu

Offline TPS

  •  2,202 2,202
    • View Profile
Re: mach3 and Bridgeport Boss5
« Reply #1 on: February 14, 2019, 03:04:47 PM »
anything is possible, just try to do it.
if you find some mistakes, in my bad bavarian english,they are yours.