Hello Guest it is November 22, 2019, 07:48:35 AM

Author Topic: G17  (Read 185 times)

0 Members and 1 Guest are viewing this topic.

Offline dude1

*
  •  1,253 1,253
    • View Profile
G17
« on: February 13, 2019, 01:23:24 AM »
Is it ok for mach3 to have a G17 on a line by itself as it is at the end of the Gcode below?

Code: [Select]
(1001)
(SPOONS X 2 ORIGIN ON FROUNT SET)
(POST PROG )
(GENERATED ON WEDNESDAY, FEBRUARY 13, 2019 192159)
(T3  D=12.7 CR=0. - ZMIN=0. - FLAT END MILL)
G90 G94 G91.1 G40 G49 G17
G21
G28 G91 Z0.
G90

(FACE1)
M5
M9
T3 M6
S18000 M3
G54
G0 X375. Y-38.857
G43 Z11. H3
Z6.
G1 Z1.27 F700.
G18 G3 X373.73 Z0. I-1.27 K0.
G1 X366.75
X126.75 F1250.
X119.75
X-120.25
X-127.25
X-367.25
G17 G2 Y-27.968 I0. J5.444
G1 X-127.25
X-120.25
X119.75
X126.75
X366.75
G3 Y-17.08 I0. J5.444
G1 X126.75
X119.75
X-120.25
X-127.25
X-367.25
G2 Y-6.191 I0. J5.444
G1 X-360.063
X-127.25
G3 Y4.697 I0. J5.444
G1 X-131.796
X-366.733
X-366.75
G2 Y15.586 I0. J5.444
G1 X-126.872
G18 G2 X-125.602 Z1.27 I0. K1.27 F900.
G0 Z6.
X-117.266 Y-6.191
G1 Z1.27 F700.
G2 X-115.996 Z0. I1.27 K0.
G1 X-113.063
X119.75 F1250.
G17 G3 Y4.697 I0. J5.444
G1 X115.204
X-119.733
X-119.75
G2 Y15.586 I0. J5.444
G1 X120.128
G18 G2 X121.398 Z1.27 I0. K1.27 F900.
G0 Z6.
X129.734 Y-6.191
G1 Z1.27 F700.
G2 X131.004 Z0. I1.27 K0.
G1 X133.937
X366.75 F1250.
G17 G3 Y4.697 I0. J5.444
G1 X362.204
X127.267
X127.25
G2 Y15.586 I0. J5.444
G1 X367.128
X367.25
G3 Y26.474 I0. J5.444
G1 X127.25
X120.25
X-119.75
X-126.75
X-366.75
G2 Y37.363 I0. J5.444
G1 X-126.75
X-119.75
X120.25
X127.25
X367.25
G18 G2 X368.52 Z1.27 I0. K1.27 F900.
G0 Z11.
G17

G28 G91 Z0.
G90
G28 G91 X0. Y0.
G90
M30