Hello Guest it is March 28, 2024, 11:20:27 AM

Author Topic: Get Error when starting probing  (Read 3330 times)

0 Members and 1 Guest are viewing this topic.

Get Error when starting probing
« on: January 14, 2019, 11:03:52 PM »
Hi,

I'm using Mach3 under windows xp. I have issue when starting probing. In my case my probe is tool 250. I do tool change operation  by doing T250 M6. The tool change mode is activated, I load the probe in the spindle and  continue the operation and finally it confirm tool change completed. I start probing by probing the z height. It starts the operation but nothing move I get the following error : MT Mode Probe Op _MT not mounted. Probe Op Canceled.

Why this error is happening

Thank you

Offline reuelt

*
  •  520 520
    • View Profile
Re: Get Error when starting probing
« Reply #1 on: April 09, 2019, 12:15:30 AM »
User solved his problem thru another forum
http://www.calypsoventures.com/forums/viewtopic.php?f=6&t=995
"the gift of God is eternal life through Jesus Christ our Lord"