Hello Guest it is March 28, 2024, 03:22:02 PM

Author Topic: How do i make a tab that is just a tool path view in Mach 4  (Read 2148 times)

0 Members and 1 Guest are viewing this topic.

How do i make a tab that is just a tool path view in Mach 4
« on: January 13, 2019, 12:10:18 PM »
I'm trying to make a screen that I can switch to that is entirely just a tool path view, but all the tabs in the current default screen set leave the other controls at the bottom. How can I keep this layout, but be able to switch to a full screen view of the toolpath?
Taig Micro Mill. 1/4-20" lead screw. Powered by 1.25hp router with a 4:1 pulley reduction. Driven by Ethernet SmoothStepper to a Gecko 6540. Nema 23 motors. 3 Axis.