Hello Guest it is October 23, 2019, 10:51:08 PM

Author Topic: setting up CSMIO/IP-S and mach4  (Read 968 times)

0 Members and 1 Guest are viewing this topic.

setting up CSMIO/IP-S and mach4
« on: December 23, 2018, 10:48:33 AM »
Hello, I have CSMIO / IP-S | 6-axis Motion Controller (STEP / DIR), Ethernet. I want to use it for mach 4, but I do not know how to attach stepper motors. In mach3, the STEP / DIR connection is directly in the mach configuration. On another machine I use ESS with mach4 and there is a STEP / DIR connected to the ESS configuration.

However, there is no STEP / DIR in the CSMIO configuration. How do I engage the engines?

Thanks for any ideas.