Hi Guys,
I'm using CSMIO IP/A on my old bridgeport milling machine for a few years now. All has been ok, but index homing has just stopped working. I've reloaded a previous config and get same issue. So I think its a hardware / sensor issue.
The machine references the z axis fine, then starts the y axis, moves the the homing switch, and reverses direction, usually then it starts slow then moves quicker, but it doesn't ever speed up, and doesn't find the index.
any ideas what to check next? If I manually turn the servo the DRO on the mach3 DRO display changes , so I guess the encoder is working?