Hello Guest it is November 15, 2019, 04:42:30 AM

Author Topic: Mach3 laser  (Read 311 times)

0 Members and 1 Guest are viewing this topic.

Mach3 laser
« on: November 28, 2018, 03:17:38 PM »
I am using Fusion 360 “Laser cutting” CAM options.

When I try to post process the normal MACH3 mill does not work properly.

After some researching found information that shows ARTSOFT
Has a Fusion 360 post processor for MACH3 Laser.

What does it take to get this postprocessor included in the Fusion 360 postprocessor list?

Thanks,
Chuck
Re: Mach3 laser
« Reply #1 on: July 09, 2019, 03:24:32 PM »
Hi All!
Can anyone explain this fuction of Mach and what its good for?

Online Tweakie.CNC

*
  • *
  •  7,997 7,997
  • Super Kitty
    • View Profile
    • Tweakie.CNC
Re: Mach3 laser
« Reply #2 on: July 10, 2019, 01:18:12 AM »
Hi Amator,

Welcome to the forum.

I have absolutely no idea just what those screen functions were intended to achieve - I have certainly never used them.  :-\

Tweakie.
Success consists of going from failure to failure without loss of enthusiasm.  Winston Churchill.
Re: Mach3 laser
« Reply #3 on: July 10, 2019, 04:06:15 PM »
Hi Tweakie!

Thanks a lot!