Hello Guest it is August 03, 2020, 05:50:32 AM

Author Topic: Mach3 on Windows 10 Pro  (Read 404 times)

0 Members and 1 Guest are viewing this topic.

Mach3 on Windows 10 Pro
« on: November 28, 2018, 11:34:18 AM »
I know this has been covered before, BUT since Search has been disabled here we go. 

Using Mach3 with Warp 9  ESS just fine on Windows 7 Pro laptop a Lenovo but would like to free up that computer for another rask. I have a Dell Latitude E5510 with Windows 10 Pro 64 bit I would like to use instead. Before I waste my time, Is this an option?    Running a 4x4 ft router table.

Yes I have been running CNC on my cinfigured laptops for years, not Win 10 however.
Retired Master Electrician, Commercial HVAC/R Service and lots of Hobbys.

Offline ger21

*
  • *
  •  6,282 6,282
    • View Profile
    • The CNC Woodworker
Re: Mach3 on Windows 10 Pro
« Reply #1 on: November 28, 2018, 12:28:00 PM »
It works fine, but you must use the current version available for download. Other versions won't run on the latest Windows 10.
Gerry

2010 Screenset
http://www.thecncwoodworker.com/2010.html

JointCAM Dovetail and Box Joint software
http://www.g-forcecnc.com/jointcam.html
Re: Mach3 on Windows 10 Pro
« Reply #2 on: November 28, 2018, 01:48:53 PM »
But Warp 9 ESS  wants a certain version of Mach , so I guess it will be trial and error.  I do know Corel Draw x6 loads and seems to work fine. Thanks Gerry.
Retired Master Electrician, Commercial HVAC/R Service and lots of Hobbys.

Offline ger21

*
  • *
  •  6,282 6,282
    • View Profile
    • The CNC Woodworker
Re: Mach3 on Windows 10 Pro
« Reply #3 on: November 28, 2018, 02:21:01 PM »
It's the same version that Warp9 recommends, but with a patch to work in Windows 10.
CNC Router Parts created the patch, and they use the ESS in their systems.
Gerry

2010 Screenset
http://www.thecncwoodworker.com/2010.html

JointCAM Dovetail and Box Joint software
http://www.g-forcecnc.com/jointcam.html