Hello Guest it is March 28, 2024, 06:18:41 AM

Author Topic: Cutter comp not working  (Read 805 times)

0 Members and 1 Guest are viewing this topic.

Offline kvid

*
  •  25 25
    • View Profile
Cutter comp not working
« on: November 14, 2018, 10:23:46 AM »
I am trying to figure out why I can't get cutter compensation to work in Mach3.

I use Fusion 360 CAM with the included stock Mach3Mill post processor to program my CNC router.

Here is the screenshot of the error that I get in Mach3:



Post processor settings in Fusion 360:



Toolpath compensation is set to wear in this particular example but I have tried "In control" and "Inverse wear" as well but with no sucess.



I attached the f3d file and the gcode.