Machsupport Forum
Mach Discussion => General Mach Discussion => Topic started by: kvid on November 14, 2018, 10:23:46 AM
-
I am trying to figure out why I can't get cutter compensation to work in Mach3.
I use Fusion 360 CAM with the included stock Mach3Mill post processor to program my CNC router.
Here is the screenshot of the error that I get in Mach3:
(http://shrani.si/f/4/nO/3GGRyxBx/mach3error.png)
Post processor settings in Fusion 360:
(http://shrani.si/f/S/He/1CLimhKq/postsettings.png)
Toolpath compensation is set to wear in this particular example but I have tried "In control" and "Inverse wear" as well but with no sucess.
(http://shrani.si/f/1h/gM/3wGqtv49/wear.png)
I attached the f3d file and the gcode.