Hello Guest it is June 15, 2021, 05:43:30 PM

Author Topic: Problems with the A-Axi  (Read 498 times)

0 Members and 1 Guest are viewing this topic.

Problems with the A-Axi
« on: October 18, 2018, 06:57:45 PM »
Hi, I'm here because I can not move the A-Axi in Mach3. The Axi is enable but the DRO doesn't move even with commands in MDI. The card that I'm using to controller the Axis is e-cut. The motor work well is for that that I think the problem is the software Mach3 or the controller card.