Hoody Help

Anyone can reolve my new issue?

Assumption is the Mother off all F ups!

Okay ive tried Google and this forum first!

<a href="http://What we have here is a &quot;Failure too Communicate!" target="_blank" rel="noopener noreferrer" class="bbc_link bbc_flash_disabled new_win">http://What we have here is a &quot;Failure too Communicate!</a>

What we have here is Any time i hit any of my super duper Osisense limit switches!

I cant back off the Hard limit, mach3 sticks in Reset Mode! ive tried many thing too no avail

Anyone have the correct answer?

I DO NEW VIDEO ALSO
https://youtu.be/W5Cain3oggQ


The correct answer you will be blessed from me for the next week!

Did you try one of the limit overrides?

Hi Gerry

Now that you mention it ... how do you cancel the 'override limits' toggle when in simulation mode? I was exploring ... and now I cannot get the red LED to stop flashing! Restart Mach3 is always possible...

For Adam: if I hit a Limit switch too fast I cannot always back off. So I hit the big red eStop button (which disables the motor drivers), twiddle the ball screw, re-enable Mach3 and reset the zero.

Cheers
Roger

Thanks for input guys, im fairly new to cnc, i know a bit now but no Pro

My CNC X and Y is on Belt driven! So when i hit Hard Limit i just cant reset no matter what! The only way i can do it is by Forcefully Pushing the axis away from my limit switch?

There must be a way? i did try the limit override as seen in my video link

Perhaps your controller doesn't properly support the limit overrides? just a guess.
They've always worked fine for me using the parallel port.

To get real help, it is best to list out your system and maybe include a photo. The possibilities are endless you see.

Cheers
Roger
W7, Mach3 .062, ESS, 2xMB-02, Gecko320s, DC motors

 ???I did not think photos would help as was hoping someone could just tell me what i was doing wrong but a piccie says a thousand words

My BOB is a Nvem CNC USB Output board!

and limit switches are Osisense ones they work okay though but nothing works!

my controller box is all wired okay i think still grounding to do, but my limit switches are fine and i dont get random emergency stops,

Its just i can move off the hard limits, osisense switches after ive hit them, the mach3 says Reset but no matter what i do it doesnt reset!

I'd be inclined to blame it on the chinese controller.

Im Starting too think this myself, I wonder whats a suitable alternative? thats not crazy in price that goes with my other bits?


Im also thinking a lot to do with it being a USB model

Anything not chinese.

ESS
UC100
UC400ETH
UC300ETH