Hello Guest it is November 15, 2019, 06:07:42 AM

Author Topic: Hilfe bei der Laser Einrichtung  (Read 2273 times)

0 Members and 1 Guest are viewing this topic.

Online Tweakie.CNC

*
  • *
  •  7,997 7,997
  • Super Kitty
    • View Profile
    • Tweakie.CNC
Re: Hilfe bei der Laser Einrichtung
« Reply #20 on: August 13, 2018, 10:50:29 AM »
Hi Matthias,

I am not sure this will help you because I am not using a Gcode file as such but these are my settings.

Tweakie.
Success consists of going from failure to failure without loss of enthusiasm.  Winston Churchill.
Re: Hilfe bei der Laser Einrichtung
« Reply #21 on: August 13, 2018, 11:07:34 AM »
Hi,

Thanks a lot.
When i am back home i will try that and see what happens...

Mathias
Re: Hilfe bei der Laser Einrichtung
« Reply #22 on: August 14, 2018, 05:23:50 PM »
Hi,

i think really the Laser is the Problem.
Even if i takte a very low laser intensity, the color is burned, but
the letters looking black and not white, because the sprayed color is burned.
Hope you understand what i mean?
I dont know if it is possible to solve that without another laser.
I think it is the difference in the nm of the laser, my is at 450nm, but a Co2 is at a higher nm, i think over 1000nm.

Matthias

Online Tweakie.CNC

*
  • *
  •  7,997 7,997
  • Super Kitty
    • View Profile
    • Tweakie.CNC
Re: Hilfe bei der Laser Einrichtung
« Reply #23 on: August 15, 2018, 01:36:22 AM »
I think you may be correct but I have never used a blue laser so I do not know for sure.
Each laser type (wavelength) certainly has it's own advantages and disadvantages.

Tweakie.
Success consists of going from failure to failure without loss of enthusiasm.  Winston Churchill.