Hello Guest it is March 29, 2024, 02:08:41 AM

Author Topic: licence code install  (Read 1532 times)

0 Members and 1 Guest are viewing this topic.

licence code install
« on: August 08, 2018, 06:48:11 PM »
Hi Ya all im Rich in Las vegas NV,, sort of semi new to CNC machines
and am presently using it to control ham radio antennas.

got my tiny little control unit going on the other machine so i know it works.
but need to know how to install the license code in this other PC?
can anyone here help?
thanks
Rich

Offline ger21

*
  • *
  •  6,295 6,295
    • View Profile
    • The CNC Woodworker
Re: licence code install
« Reply #1 on: August 08, 2018, 07:05:42 PM »
If it's Mach3, just copy the license file over to the Mach3 folder.
Gerry

2010 Screenset
http://www.thecncwoodworker.com/2010.html

JointCAM Dovetail and Box Joint software
http://www.g-forcecnc.com/jointcam.html
Re: licence code install
« Reply #2 on: August 08, 2018, 08:09:15 PM »
Ok thanks,,
Re: licence code install
« Reply #3 on: August 08, 2018, 10:58:43 PM »
Hi everyone. I'm running Mach 3 demo. My CNC machine is on a computer that is not hooked to the internet. If I buy the license and it is sent to my computer that is hooked to the internet will I be able to transfer it to my other computer? Thanks for your help

Offline ger21

*
  • *
  •  6,295 6,295
    • View Profile
    • The CNC Woodworker
Re: licence code install
« Reply #4 on: August 08, 2018, 11:00:05 PM »
Yes, it's just a file that you can copy to the other PC.
Gerry

2010 Screenset
http://www.thecncwoodworker.com/2010.html

JointCAM Dovetail and Box Joint software
http://www.g-forcecnc.com/jointcam.html
Re: licence code install
« Reply #5 on: August 09, 2018, 02:09:23 PM »
Thank you so much for your quick response