Author Topic: Display Gcode running screen of Mach3 in Visual Studio  (Read 1089 times)

0 Members and 1 Guest are viewing this topic.

Offline duyngdang

  • Holding
  • Posts: 2
    • View Profile
Display Gcode running screen of Mach3 in Visual Studio
« on: July 04, 2018, 01:22:31 PM »
 Hi all

I am using Visual studio to automate Mach3. So far all ok, but 2 thing I can not do is:

  1_Which DRO code to show Gcode running screen in Visual studio?

  2_Which DRO code to show Tool Path screen in Visual studio?

 If someone automated Mach3 by  Visual studio regarding about topic above, please help!

Thanks and best regards

Offline Tweakie.CNC

  • Global Moderator
  • *
  • Posts: 7,646
  • Super Kitty
    • View Profile
    • Tweakie.CNC
Re: Display Gcode running screen of Mach3 in Visual Studio
« Reply #1 on: July 05, 2018, 02:29:23 AM »
If you use one of the free Screen Designers (http://www.machsupport.com/software/downloads-updates/screensets/) they should give you the information.

Tweakie.
Success consists of going from failure to failure without loss of enthusiasm.  Winston Churchill.