Hello Guest it is March 28, 2024, 07:31:47 PM

Author Topic: DRO not 0  (Read 3632 times)

0 Members and 1 Guest are viewing this topic.

DRO not 0
« on: July 22, 2007, 01:13:54 AM »
HI to all, my MACH3 rev R2.02.00 report on DRO
X-2.5500
Y-3.4420,
i have UN-CHECK "PERSISTENT DRO" this not resolve problem
i check in the "Setting alt6" and the value is reported in "ENCODER POSITION
X-2.5500
Y-3.4420"
i have click on ZERO
the value return
X-0.5500
Y-0.4420.
at next run MACH3 return the primitive value
X-2.5500
Y-3.4420,
WHAT IS THE ERROR?
I NOT USE ENCODER....
Any ideas for resolve this problem is WELCOME !!
thank in advance
Franco

Offline Whacko

*
  •  239 239
  • Happy Days
    • View Profile
Re: DRO not 0
« Reply #1 on: July 28, 2007, 05:22:07 PM »
Hi Franco,
Have you entered zero in the DRO's in the Settings screen?
William
Nothing's impossible
Re: DRO not 0
« Reply #2 on: July 29, 2007, 02:49:31 PM »
Hi Williams, i not find "Setting screen" in the menu... i resolve problem in the SETTING FIXTURE
with cleared the value present in the G54 cell X and Y
Thank for help
Franco