Hello Guest it is March 29, 2024, 04:54:18 AM

Author Topic: loading lazycam to mach3  (Read 2590 times)

0 Members and 1 Guest are viewing this topic.

loading lazycam to mach3
« on: July 21, 2007, 10:25:30 AM »
WHEN TRANSFERRING DESIGN FROM LAZYCAM TO MACH3 ONLY GET PARTIAL OF DESIGN IN MACH3.
I AM VERY NEW TO ALL OF THIS BUT VERY MUCH WANT TO LEARN.
HAVE BUILT A MACHINE AND HAVE IT RUNNING.
ANY HELP WOULD BE MUCH APPREACIATED.

Offline Chip

*
  • *
  •  2,055 2,055
  • Gainesville Florida USA
    • View Profile
Re: loading lazycam to mach3
« Reply #1 on: July 21, 2007, 11:31:52 AM »
Hi, Tashby

Maybe this is your problem ?

Brian Barker
Administrator

There is a 50 line limit to Lcam if you are not a Licensed Mach3 user on that computer... We had to do this because we started to get users that were running the base version of Lcam and Not mach3! There is just no time to support a free product Sad If you have a licensed version of Lcam you are all set and you don't need to have a Mach3 license (There are people running Lcam to program other controls)

Also the Gcode limit of Mach3 is now 500 because there were machines being shipped with Demo version of mach3 and the OEM was telling them that there was a 1000 line limit to the control! O well...
Brian
   
Thanks, Chip
« Last Edit: July 21, 2007, 11:36:13 AM by afn09556 »
Re: loading lazycam to mach3
« Reply #2 on: July 21, 2007, 11:54:25 AM »
Thanks very much.
i will be purchasing the program.