Hello Everyone, First time posting as many of my questions have been answered by searching this forum.
However I do have a problem and after researching still can't figure it out.
Using Mach4 Build 216, Motor 0 = Y1, Motor 1 = X, Motor 2 = Z, Motor 3 = A or Y2 slave.
Using Limits (+) and (-) on all axis. Homing is using Y--, X--, Z++. Limits work and so does homing for Z and X,
But Y axis does not home properly. Message Error: No Homing Pin is assigned or enabled for Axis 3.
They are enabled as far I know and according to everything I've read.
When I hit OK to message it moves Y axis to Y-- limit, Y-- trips and stops, but does not offset to home like Z an X.
See attachments for history.
Appreciate the Help.